Tuesday, August 25, 2015

Reload .38 Special As Cheap As .22 Ammo

I don't know about you, but I pretty much quit shooting .22 rimfire ammo during the worst of the ammo crunch. I never ran out of .22 ammo, nor did I intend to do so if I could help it. So I just hoarded my meager supply of rimfire ammo and used it only for serious purposes like hunting small game and dispatching varmints around the homestead. For plinking, short range target shooting and most other purposes for which .22s are popular, I used .38 Special. "What?" I hear you saying; "But they are even more expensive, and were also not always readily available!" True. Unless you reload. Granted, reloading components became difficult to find too, but not as difficult as .22 rimfire ammo. The exception was the fast pistol/ shotgun powder that is most useful for cheap .38 reloads, but I had a few pounds of Red Dot, Bullseye and a couple other fast powders. Since the average standard velocity .38 load uses 3.5 grains or less of these types of powders, that equates to 2,000 or more rounds per pound of powder. I had a reasonable supply of primers too, and I had better luck finding more primers than finding .22 ammo. There were times when I couldn't find any rimfire ammo at all, but I don't remember ever being unable to find primers. As for bullets, they were always at least somewhat available too; but even better, I cast my own bullets. Lead never became the slightest bit difficult to find, so that meant I always had as many bullets as I needed. Better still, I have a small shooting range on my property and can dig expended bullets out of the backstop to melt and cast into new bullets. So what are we looking at, price-wise? Now that .22 rimfire is becoming somewhat readily available again, I find most of it going for 10-12 cents per round. Occasionally I find "loss-leader" type .22 ammo for around 6 cents per round. Let's be realistic. Even before the ammo crunch, most varieties of .22 rimfire ammo (not including .22 Magnum, which is much more expensive) were around 10 cents per round. Probably most of the bulk of .22 ammo sold was about half that price, but that's just because the average person bought the cheapest loss-leader ammo they could find. But if you bought .22 ammo based upon some attribute other than price, you probably had to pay 10 or more cents per round. At the time of this writing, .22 ammo availability in my area is such that the single-box, 10+ cents per round ammo is in stock most places. The only thing that is not readily available is the loss leader, bulk pack ammo; and even that is sporadically available. So what does that have to do with .38 Special, you ask? Simply this: even at mid-panic prices, it was possible to purchase enough components (including bullets) to keep oneself supplied with .38 Special ammo at approximately the price of standard, non-loss-leader .22 ammo. And as it stands right now, I have found primers for $16 per thousand, powder for $17 per pound, and lead for a couple of dollars per pound. That means that even if I were starting today with nothing more than some empty .38 Special cases and some rudimentary reloading and bullet casting equipment, I could produce my own loaded .38 Special ammo for about seven cents per round. If I got out there and dug the lead out of my backstop or scrounged free lead some other way, I could reduce the cost per round to about 2-1/2 cents. That is a buck and a quarter per 50-round box, or $25 per thousand! Yes, you read that right: less than half the price of the cheapest loss-leader .22 ammo! Did I hear you say that you aren't yet set up to reload your own .38s? If so, here are some links to get you started: 
.38 Special bullet diameter: .358" lead bullets, .357" jacketed. Primers: Small Pistol standard. Load data: http://www.reloadammo.com/38loads.htm Here's a good source of bullets, powder and primers: http://www.grafs.com/
And a video tutorial: https://youtu.be/ugwBzVUhqow

 

Monday, April 13, 2015

Dirt Cheap Survival Airgun



One thing the recent .22 ammo shortage has done, on a personal level, is give me the impetus to get back into airguns. When I was young I had two airguns, both Crosman: a model 180, single shot co2 powered .22 pellet rifle and a 766 American Classic multi-pump BB/.177 pellet rifle. The latter still exists, but with a different name: the model 2100. It is one of a very few tools of my youth that still exist pretty much exactly as they were then.
Crosman also makes a co2 powered .22 pellet rifle that is very similar to my old 180, and I have one of those too.
This video is about neither of those, but a series of compact multi-pump pellet pistol/carbines that are small enough to stash or carry unobtrusively, yet big enough, powerful enough and accurate enough to reliably put food on the table.

Tuesday, April 1, 2014

Reloading with the Lyman Ideal 310 Tong Tool

Video demonstration and tutorial on reloading with the Lyman Ideal 310 Tool. These tong type reloading tools were originally designed for reloading in the field, and they still excel at that purpose. This video covers the basic steps for reloading with one.

Monday, February 3, 2014

Living Off The Land


Living Off the Land In North Temperate Regions. A US Navy survival film, ca. 1955.

Thursday, November 21, 2013

Another .32 Trail Gun



Back in 2008 I posted this very short blurb about my Taurus .32 Long trail gun:
http://www.woodsloafing.com/2008/05/my-32-trail-gun.html

Here is another little .32 Long trail gun that I have acquired since that post. It is a 2-1/2-inch barreled H&R model 732, made in 1968. I loaded the ammo that I am firing here on an antique Ideal loading tool. Not the 310, but the earlier one that does not use dies and has a built-in bullet mould. The bullets I am firing did not come from that mould, but from my Lyman #311008 mould which casts a 115 grain flatnose bullet that was originally intended for the .32-20.

Tuesday, May 21, 2013

Mosin Nagant Torture Test

In this video, the guys from Moss Gun try to kill a Russian Mosin Nagant rifle. I was surprised that they started the overloads with 20 grains of Red Dot, then later used a full case of 4350. My guess would have been that the full case of 4350 would be perfectly fine, while the 20 grains of Red Dot would be far higher pressure. Also, while the load of 2400 they used was definitely an overcharge, half that amount of 2400 would probably be a decent load. That is not a recommendation, by the way.

Friday, March 1, 2013

Practical Survival Firearms

PRACTICAL SURVIVAL FIREARMS

By Cope Reynolds
Suarez International Staff Instructor

In today’s troubled world, and with the threat of things becoming even more troubled, the subject of what firearms are best for particular situations comes up with monotonous regularity. In this article I will weigh the pros and cons of different weapons, ammunition, sighting devices, storage techniques, and a few miscellaneous subjects. This is not intended to be all-inclusive, or the “word of law.” My opinions and methods of doing things come from listening with an open mind, experimenting without fear of failure, and the experience of over 35 years of hunting, plinking, competition shooting, reloading, and living in the Southwest--where it is possible to do these things whenever the mood strikes. I hope to be able to save the new shooter/survivalist the expense and inconvenience of learning things the hard way, and maybe offer the experienced shooter an idea or two he hasn’t thought of.


WHAT IS SURVIVAL?

The subject of what is the best survival weapon has created some intense debates over the years, often resulting in fist fights, best friends splitting up, divorces, sabotage, or relocation. It really doesn’t have to be that way. One of the problems is that everyone has a different definition of “survival.” To some, it means an end-of-the-world scenario (as in the movie “Mad Max”) where things just can’t get any worse. For such an unlikely event, one would want to choose a gun that never needs repairs or spare parts, and for which there is an unlimited supply of ammo available. For others, survival means constant foraging for food while having to battle foreign troops of the New World Order on a regular basis. In such a case, one would want a gun of the same caliber and type as one’s opponents. This would make it easier to “liberate” needed ammo and magazines. Still others feel that survival entails avoiding detection, gathering food, and repelling unwanted guests.

The “Mad Max” scenario is unlikely (though not impossible) in our lifetime. And by the time we got to that point, you’d probably not have the same weapon you started with anyway. The “New World Order” scenario has less to do with survival than combat. A true survival situation would, in my opinion, require a somewhat different kind of rifle than that which would be used primarily for combat. The “avoiding/foraging/repelling” scenario is not only the most likely, but is already a way of life for some.

What I’d consider to be a true survival situation might be caused by such things as getting lost or injured in the wild, car wrecks or plane crashes in remote areas, or a social and/or financial collapse that forces us to hunt for food and protect our families from predators and looters. For purposes of this article, let’s assume that these possibilities are what we’re primarily concerned with.

RIFLES AND AMMUNITION

There’s no way we can discuss every scenario that may arise, but let’s try to cover some that are most likely, and the rifles and ammunition combinations that are best suited to them.

When someone has to survive an unscheduled stay in the wild, the three most important things that a rifle can accomplish for him (or her) are signaling, defense, and harvesting small-to-medium game for food. For food, you need to consider the areas you’ll most likely be traveling in, and what kind of game is around. A rifle chambered for the .22LR will probably do 90% of anything you will need to do in the U.S. This caliber has taken--and will continue to take--deer, though for this purpose it is a very poor choice. However, the lowly .22 is a fine choice for small game, requiring lightweight, inexpensive ammo and causing minimal damage to the meat. The sharp crack and high decibel level of the .22 also makes it fairly good for signaling.

While not the best choice for defense, the .22 makes a formidable weapon in the hands of a calm, cool, collected marksman. If you’re traveling and not really expecting trouble, but want to have something available “just in case,” you might consider one of the take-down models such as the Marlin 70SS, or a copy of the old Charter AR-7. They’re light, compact, and relatively inexpensive. Ruger, Marlin, Remington, and others all make fine .22 rifles in semi-auto, bolt, pump, lever, and single-shot actions. Another good choice that offers something for big and small game and defense is the Savage 24-F or 24-V. This combination gun offers the shooter the versatility of having a rifle and a shotgun in the same easy-to-carry package. The rifle barrel is on top and is either currently, or has been, offered in a number of different calibers, including .22LR, .22 Magnum, .22 Hornet, .222, .223 and .30-30. Depending on the model, the shotgun portion can be had in .410, 20, or 12 gauge. The newer 12 gauge version offers interchangeable choke tubes.

Another popular combination is the carbine and handgun that use the same cartridge. This is particularly appealing to those who carry both a sidearm and a rifle and wish to avoid the weight and confusion of carrying two kinds of ammunition. The semi-auto rifle versions that shoot 9mm, .40 S&W, or .45 ACP do not offer much of an advantage over their handgun counterparts in terms of velocity or energy, but do provide a longer sight radius, thus improving accuracy. However, the survivalist who is armed with one of the lever action carbines chambered for the .357, .41, or .44 Magnum, or the .45LC cartridges, paired with one of their handgun counterparts, is indeed very well armed and prepared for most anything he may get himself into. In my opinion, the .357 is the best option given the scenarios we’re considering here (unless you happen to be in big bear country) due to ammo availability, light recoil, and fairly mild muzzle blast--though a .357 Mag handgun still has an earcrushing blast. Since the .357 carbine will shoot most anything that the .357 revolver will, including .38 Special, you should never have any ammo-feed problems.

A good rifleman should rarely feel undergunned with a lever action in a firefight. It’s a very fast-handling weapon, and there are no magazines or stripper clips to lose or damage. The venerable .30-30, for example, is an outstanding rifle, though keep in mind that there is no conventional handgun chambered for that round. Unlike any of the military-style weapons, the levergun can be loaded without taking the gun out of battery. In other words, when there’s a lull in the action, or while you’re moving to another position, it’s simple to stuff more shells into the tubular magazine. If while doing this the enemy catches you by surprise, you simply drop the rounds still in your hand and resume firing. There’s no chance of dropping the magazine you were loading--thus being left with an “$800 single shot.”

For those of the military persuasion, or who are preparing for TEOTWAWKI, a whole new set of rules comes into play. Quite naturally, we’d still like a rifle that is easy to handle, but we also might want to consider a semi-auto built for sustained fire. The military (or military look-alike) weapons are the ones that really fill the bill. When it comes to these, there are a couple of things you need to consider before your purchase. First, of course, is ammo availability. Can you afford enough ammunition to last the duration of the hardships that may befall you? Also, if you’re forced out of your home and away from your supply cache, for whatever reason, you really don’t want to be shooting a “bastard caliber” (i.e., one that is rare and thus difficult to replenish). While you may not like to think about harming others, you need to consider choosing a caliber that is likely to be used by either looters or foreign troops. That way, you can more easily acquire additional ammo should you be fortunate enough to be the victor in a skirmish.

Another thing to think about with regard to military-style rifles is the detachable/fixed magazine dilemma. Sure, the detachable mags are faster to reload, but how many can you carry at once? Are you sure you’ll make it back to base tonight where there are more magazines awaiting you? And did you stash enough magazines to begin with to last you indefinitely in the event that manufacturing is disrupted? Also, what makes you think that, due to the stress and confusion of a real live gunfight, you’ll remember (or have time) to pick up your discarded mags? You are not in the military. There’s no resupply waiting in the rear. No air drops. This is one of the reasons I prefer the SKS over the AR-15. I know, I know. The AR-15 is what we’re all used to . . . and many of the parts will interchange with the M-16 . . . and it’s a NATO round . . . and yada, yada, yada.. But the .223 does not have the energy of the 7.62x39, the AR is not as reliable as the SKS, and although the Ruger Mini 14 is a very reliable weapon, it lacks a little in the accuracy department. The .223 runs out of energy at 300 meters or so, and the 7.62x39 generally runs out of accuracy at about the same distance. Each has virtually the same effective range. However, the 7.62x39 does have substantially more energy at longer ranges.

But back to the magazine debate. I prefer the fixed magazine of the SKS because I can't lose it. And I can also single-load it through the ejection port if I run out of stripper clips. As to size, I prefer the 20-round fixed mag over the ten-round. Now, I don't use the 20-round mag because it holds 20 rounds; I use it because it holds more than ten. That may sound stupid, but let me explain. With the standard ten-rounder, if you fire less than ten rounds, you will have a partially full mag that cannot be refilled except by loading one round at a time. This means you're either going to have a partially loaded gun, or a half-full stripper clip rattling around in your gear losing shells, or you'll have to take time to top off the mag by hand. Circumstance may only allow you to get one stripper load in the 20-round magazine to start with. If you start out with either ten or 20 rounds, you can then shoot anywhere from two to 11 rounds and still be able to easily insert a full stripper clip into it. (It is quite difficult to insert a ten-round stripper in a 20-round mag that already has ten rounds in it; they call it a 20-round magazine, but it works best with 18 or 19.) Since you will not be able to lock your bolt back to insert a stripper clip in an SKS with a partially loaded magazine, here is the procedure that works for me: place the butt of the rifle in the groin area, just below the opening of your right hand trouser pocket. Then reach across the top of the rifle with your left hand and pull the bolt handle fully to the rear. This will eject a live round out that you can either let fall or catch with your right hand (if you have time). Now let the bolt slide slightly forward to accept the clip and insert a loaded stripper clip with your right hand. Now grasp the rifle's forearm with your right hand and release the bolt handle with your left hand and you’re ready for action.

Ideally, we would all like to have either an M1A or FN-FAL (my personal favorite is the AK-47)and a couple hundred 20-round magazines, but for those who just recently started preparing, or who can’t afford the expense, that’s only a dream. Any good rifle chambered for the .30-06, .308 (7.62x51 NATO), the .223 (5.56 NATO), or the 7.62x39 will suffice. But do take the aforementioned suggestions into consideration before buying. Yet another consideration is the ability of your rifle to resist corrosion and weathering. It’s advisable to try to find a rifle with a protective finish, or that is made of stainless steel, and has either a laminated wood or synthetic stock.

There are a number of different sighting options for the survival rifle, all of which have their own calling in life. The open, iron sights that come on most commercial hunting rifles are suitable for most purposes, but are fragile and useless in low-light situations. A good quality scope, on the other hand, is no more fragile than open sights and offers far superior accuracy and low-light capabilities. A good compromise between the two is the aperture, or peep, sight. This sight is used on almost all military-style rifles and is rugged, easy to use, and highly accurate. Aperture sights are also significantly better than open sights in low light. The aperture sight is operated by centering the uppermost part of the front sight in a small aperture in the rear sight, while also holding the front sight on your target. Your eye naturally places the front sight in the center of the aperture with little or no conscious effort on your part. The rear aperture appears as a cloudy ring and is not distracting at all. Just focus on your front sight (which you should also do with open sights, of course, but it’s easier with peep sights), place it on your target, and shoot. These are also sometimes called “ghost ring” sights.

HANDGUNS

Handguns provide yet another platform for some very heated discussions as to what’s best for what purposes: revolver versus semi-auto; single-action or double-action; stainless steel or blued; short barrel versus long barrel; 9mm, .40, .45, .38, or .357. There are also arguments over whether it should be carried “strong side” (i.e., on the side corresponding to your predominant hand) versus “crossdraw,” and the shoulder holster versus the tactical (hip or thigh) holster. And there’s always the night sights issue. It seems the things people find to argue about are practically endless. Let’s try to address a few of them.

Whether you should carry a wheelgun (revolver) or a self-feeder (semi-auto) is a matter of personal preference. Both have their good and bad points. The revolver is somewhat slower to reload and, in most cases, has fewer shots to offer. But there are no magazines to lose and they are mechanically fairly simple. Another thing to consider is that revolvers are offered in much more powerful calibers than are most self-feeders, if that is of concern to you.

In order to reload the double-action revolver with any degree of rapidity, one must use speedloaders. These are nifty little cartridge-holding devices that can release a full load of cartridges into the cylinder of your double-action with the twist of a knob or the push of a button. They are not quite as fast as changing magazines in a semi-auto, but run a very close second with practice. The best speedloaders on the market, in my opinion, are those manufactured by HKS. They are incredibly rugged and reliable. In contrast, reloading the single-action revolver requires removing and replacing cartridges one at a time. An alternative to this would be to have another cylinder or two fitted at the factory for your gun. This will allow you to change cylinders for a more rapid reload, but is not really cost effective. When buying revolvers, stick with top name brands such as Ruger, Smith & Wesson, Colt, and Taurus. My personal favorite is Ruger. Their revolvers are extremely rugged, moderately priced, and more than adequately accurate.

Modern manufacturing techniques, advanced metallurgy, and the advent of space-age polymers have made the semi-auto pistol every bit as reliable as the revolver, and in many cases just as accurate. Modern semi’s are available in a number of different finishes, such as stainless steel, electroless nickel, Parkerized, and, of course, blued. Stay away from nickel or chrome plated guns. They are pretty durable, but once the plating chips, the chip increases in size until the gun must eventually be refinished. The last decade or two has also brought us pistols built on a polymer frame. The most notable of these is the Glock. The Glock was the one of the first of the “plastic” guns, and is virtually indestructible. The polymer that Glock uses is 17% stronger than steel and 83% lighter. In the standard Glock, there are a total of 36 parts, including the magazine, base plate and follower, 3 pins, and no screws. The Tennifer finish on the metal parts is more durable than stainless steel and nearly as hard as diamonds. Needless to say, Glock is also one of my personal favorites.

The debate over which handgun caliber is best is as old as the calibers themselves. The bottom line is shot placement. If you don’t hit your target in the right place, it doesn’t matter what you use. Two of the most popular calibers are 9mm and .45. The 9mm has more penetration than the .45, but the .45 has more energy. My personal favorite is the .40 S&W, as I think it has the attributes of both. But none of these has quite the power of the .357 magnum, let alone the .41 mag or .44 mag.

For carry, I prefer a crossdraw holster for my hunting revolvers, and a beltslide for my daily carry gun, which is a Glock. The crossdraw allows easy access to the gun when driving or riding a horse. The lighter, shorter semi-auto in the beltslide is not even noticeable and I can wear it in any situation.

Tritium night sights are definitely a plus in low-light operations. They offer a very clear, precise sight picture even in total darkness. Tritium is a radioactive substance that generates light--but don’t worry, you would have to ingest something like 30,000 sets of them in order receive as much radiation as one dental X-ray. Most of these sights offer a 12-year half-life, which means that they will be half as bright in 12 years as they were when they were manufactured.

The handgun’s role in the survival arsenal depends a lot on how proficient you are with it. Although a handgun shouldn’t be considered your primary weapon, you should be competent enough with yours that if it was all you had, you’d still be able to feed and/or defend yourself. Generally speaking, the average effective range of most handguns is about 50 yards. That being said, depending on caliber and type of gun, you can easily stretch that distance out past 100 yards with practice. A good, accurate .22LR handgun, such as the Ruger MK II or Single-Six, is indispensable for small game hunting. Most handgun calibers are also suitable for deer-sized game if you are close enough and place your shot well. I am not, however, advocating that an inexperienced handgunner go after deer, except in an emergency. Also, you would be well advised to buy a handgun with some kind of protective finish, or (with respect to self-loaders) a polymer frame.

Whatever sidearm you choose, use the right ammunition for the job. For defense from most animals (including two-legged varmints), and also for hunting medium-sized game, a good hollowpoint is the most effective--although there is considerable evidence that some of the flat-nosed, hard cast bullets are also very effective in the hunting field. For larger dangerous game, and for smaller edible game, a solid bullet such as some FMJ’s, and most hard cast bullets, are the better choice. They’re better for dangerous game because they offer more penetration, and for small game because they don’t destroy as much meat as a hollowpoint.

A FEW WORDS ABOUT SHOTGUNS

For personal protection, the shotgun has no peer. It is a graphically devastating weapon. For most of the purposes considered in this article, a pump-action 12 gauge is hard to beat. Although the 20 gauge is a very comfortable and effective gun to shoot, it’s best reserved for hunting. This is because you’ll have a hard time finding either buckshot or slugs for the 20. Wal-Mart, for example, rarely even carries the heavier 20 gauge stuff, simply because there’s not enough demand for it. And it’s hard to get them to special order things sometimes. A lot of men buy a 20 gauge for their kids or wives, but they mostly use them to hunt birds or rabbits, so most stores don’t see a need to carry anything but the smaller shot. There just aren’t very many people who hunt deer with a 20 gauge, or use it for defense.

Not that there’s anything wrong with the 20 gauge; we have two of them. But for a survival situation, the 12 gauge is a much better choice, simply because of ammo availability. Police, military, other survivalists, militia members, ranchers, etc., all use the 12. If you do insist on using the 20 gauge, and plan on storing a bunch of shells to make up for non-availability, what happens if you have to “bug-out”? You can only carry so much, and leaving the gun behind shouldn't be an option, as I think a shotgun is mandatory. When you use up what you can carry, you’ll just be out. You can’t carry all that reloading stuff with you, either. I personally am not really stocking up on any reloading supplies. Of course, I have a bunch anyway, just because it’s a serious hobby of mine, but I figure when things go bad, I would rather have all those components already assembled into something that I can use.

Something else to consider is power. While the velocities of the 20 gauge are comparable to the 12 gauge, the weight of any given shot charge or slug is much more with the 12. Granted, this generates a little more recoil, but my 5’5”, 140-lb. wife can handle a 12 just fine. (She also prefers a .44 mag to hunt with. It’s all in the training.) The 20 gauge usually shoots a slug that either weighs 273 grains or 328 grains. And I have one “recipe” for a 341-gr. slug. Compare that to a 12 gauge that shoots slugs weighing anywhere from 437 grs. to 575 grs. That’s a hell of an increase in delivered energy, which translates to penetration and longer range. Twelve gauge slugs are also good medicine for “hard” targets; i.e., cars, block or brick walls, and so on. Not as good as a .308 or 30.06 in some cases, but still very good.

As far as buckshot goes, #3 buck is the by far the most common for the 20 gauge. If you get much bigger than that, the 20’s little shell just doesn’t hold enough pellets to do any good. If the 12 gauge only holds between nine and 12 double-ought buckshot pellets (depending on manufacturer and type of wad used), you can safely assume that the 20 would hold only five to six of the same pellets. While you can put eight pellets of #1 buck in a 20 gauge shell, most 12 gauge loads will hold 16. In any case, you’re not looking at a very dense pattern from the 20 for defensive purposes.

A couple of the best choices for defensive shotguns are the Mossberg 590 or 500, and the Remington 870. While some will tell you that the 590 is far and away better than the 870, it really comes down to what you like. I’ll admit that the 590 has a slight edge over the 870, simply because it was designed solely as a combat shotgun. It really has no sporting purpose. There are plenty of after-market accessories available for both the Mossberg and the Remington. Also, Winchester makes a couple of suitable defensive-type shotguns, but I have no personal experience with them.

LONG-TERM GUN STORAGE

A question I get asked frequently is, “How do you suggest I store firearms and ammunition in such a way that I would not lose them in the event my house burned down or was broken into or Uncle Sugar wanted to come get them for one reason or another?”

One way is to buy one of the waterproof containers available almost everywhere (and cost too much), slide your gun into a rust-proof storage bag, put it in the container, then bury it somewhere. The method I recommend, however, works just as well and will protect your guns indefinitely.

Buy as much 8-inch PVC pipe as you need from a water/sewer materials distributor. Eight inches in diameter is larger than you will find at any hardware store. Get the kind of pipe designed for handling sewer water rather than fresh water (ask for SDR35). The water pipe works fine, but is unnecessarily heavy and expensive. There are three kinds of caps you can get to seal the ends. One kind is glued on and is permanent, but if you’ve never installed pipe before, it’s easy to miss a spot with your glue and thus allow for leakage. Another kind of cap is rubber gasketed. To use these, bevel the pipe back about 3/4 of an inch with a rasp or grinder, smear an even coat of lubricant on the pipe end (any kind of liquid soap will work), then slip the cap on. If done correctly, the seal will be absolutely 100% air and water tight. The third kind of cap uses a glue-on adaptor with a screw-type plug. You just glue the adaptor to the pipe end and the plug screws in to it. But these are unnecessarily expensive and just about impossible to remove without a BIG wrench. In my opinion, the gasketed caps are the best choice because to remove them, you can hold the pipe between your legs and kick them off or use a rock. No tools are required. To put them back on the pipe, just use a little liquid soap as you did the first time. You should have room for two long guns, a couple of handguns, and a little ammo for each in a 4-foot section of 8-inch pipe. Since scoped rifles, rifles with fixed mags, and even some open-sighted rifles with a lot of drop in the stock may not fit into a 6-inch pipe, spend just a little more and buy the bigger 8-inch stuff.

Now that you have your pipe prepared, clean your guns as you normally would, leaving a very light film of oil on them. Forget cosmoline or heavy grease; Break-Free is my preference. Slip each gun into a breathable case, then put it into your pipe. To make an effective desiccant, put some crushed sheetrock or kitty litter on a cookie sheet and bake it at 300 degrees for about 30 minutes. Fill a sock half full with your homemade desiccant, tie it off, and put it in the pipe. (If you don’t like the homemade method, you can always go spend a bunch of money on special desiccants that some people say you just can’t live without.) Before sealing, keep the pipe in the house for a day or two to make absolutely sure that the interior is as dry as it can be. This is especially important if you live in a humid climate.

Bury the sealed pipe somewhere away from your house, preferably half a mile or more depending on the population close at hand. If possible, bury it vertically in order to present a smaller target for metal detectors and ground penetrating radar. If you must bury it close to your home, try to place it parallel to metal pipelines, under the edge of a metal-reinforced concrete slab, under a fence post, etc.

SOUND ADVICE

In closing, I would like to offer my suggestions for a practical arsenal. For the individual that is solely concerned with wilderness survival and personal defense, I would suggest, at the very least, a .22 handgun and rifle, a centerfire handgun, and a shotgun. The .22s provide you with the means to practice a lot for the price of peanuts. As I noted at the beginning of this article, a .22 will do 90% percent of whatever needs done. The centerfire handgun or the shotgun will provide you with all the defensive capabilities that you’ll need for any dangerous game or bad guys you’re likely to run across in the woods.

For folks who are concerned with the state of the nation and the rough waters that lie ahead, I would suggest all the above, along with a centerfire rifle in one of the configurations we discussed earlier. Remember, you can’t have too much ammo. I would recommend you have a minimum of 1,000 rounds for each centerfire rifle, and 500 to 1,000 rounds for the shotgun, with about half of that being birdshot (such as #6 or #4) and the rest in heavy buckshot and slugs. The birdshot is just as deadly at close range as the bigger stuff and is also suitable for small game hunting. I’d also suggest 500 rounds for each centerfire handgun, and as many .22 shells as you have room to store. I truly believe that .22 ammunition may be the standard by which barter with, at least for a time. I think the time will come when a box of .22 shells will buy you a chicken or two or a set of flashlight batteries.

See that every person in your home who is old enough to shoot is properly trained in the use of all these guns, and that eye and ear protection is available.

There are many other things concerning the troubled times that await us that I’d like to share with you, but that’s another story.

Copyright 1999 by Cope Reynolds

This article may be freely copied and distributed for non-commercial purposes, as long as it remains unedited as to content (which includes the title, the author’s name, and copyright information), and this notice is attached.
__________________

Saturday, February 23, 2013

Cast Bullets in a Hi Point Carbine

This is a video of a Hi Point 995, 9mm carbine firing 158 grain cast bullets. The bullet is a Lee .358-158 RF, tumble lubed and sized to .356-inch. Primers are Tula and the powder is NM-04 which is a Russian or Chinese (I forget which) copy of Dupont PB. If you don't have any PB, Green Dot works fine too. This is cheap shooting at its best: the brass is free (range pickups), the powder was something like $40 for an 8 lb jug, the primers were about $20 per thousand and the lead was free. The lube is a couple of bucks for 1,000 rounds' worth. That comes to less than thirty bucks for a thousand rounds. Ok, not fair since I already had this stuff before the current buying frenzy. But even if you have to buy Green Dot and pay $30 per thousand for primers, you can still come in at about the price of loss-leader .22 ammo, assuming you can scrounge 22 lbs of lead. If you have to actually buy lead for a dollar a pound, that still only puts you at $60 per thousand rounds. Build a backstop in your backyard so you can salvage at least some of the lead for reuse, and the next batch will be cheaper.

Tuesday, February 12, 2013

Practical Survival Firearms

PRACTICAL SURVIVAL FIREARMS

By Cope Reynolds
Suarez International Staff Instructor

In today’s troubled world, and with the threat of things becoming even more troubled, the subject of what firearms are best for particular situations comes up with monotonous regularity. In this article I will weigh the pros and cons of different weapons, ammunition, sighting devices, storage techniques, and a few miscellaneous subjects. This is not intended to be all-inclusive, or the “word of law.” My opinions and methods of doing things come from listening with an open mind, experimenting without fear of failure, and the experience of over 35 years of hunting, plinking, competition shooting, reloading, and living in the Southwest--where it is possible to do these things whenever the mood strikes. I hope to be able to save the new shooter/survivalist the expense and inconvenience of learning things the hard way, and maybe offer the experienced shooter an idea or two he hasn’t thought of.


WHAT IS SURVIVAL?

The subject of what is the best survival weapon has created some intense debates over the years, often resulting in fist fights, best friends splitting up, divorces, sabotage, or relocation. It really doesn’t have to be that way. One of the problems is that everyone has a different definition of “survival.” To some, it means an end-of-the-world scenario (as in the movie “Mad Max”) where things just can’t get any worse. For such an unlikely event, one would want to choose a gun that never needs repairs or spare parts, and for which there is an unlimited supply of ammo available. For others, survival means constant foraging for food while having to battle foreign troops of the New World Order on a regular basis. In such a case, one would want a gun of the same caliber and type as one’s opponents. This would make it easier to “liberate” needed ammo and magazines. Still others feel that survival entails avoiding detection, gathering food, and repelling unwanted guests.

The “Mad Max” scenario is unlikely (though not impossible) in our lifetime. And by the time we got to that point, you’d probably not have the same weapon you started with anyway. The “New World Order” scenario has less to do with survival than combat. A true survival situation would, in my opinion, require a somewhat different kind of rifle than that which would be used primarily for combat. The “avoiding/foraging/repelling” scenario is not only the most likely, but is already a way of life for some.

What I’d consider to be a true survival situation might be caused by such things as getting lost or injured in the wild, car wrecks or plane crashes in remote areas, or a social and/or financial collapse that forces us to hunt for food and protect our families from predators and looters. For purposes of this article, let’s assume that these possibilities are what we’re primarily concerned with.

RIFLES AND AMMUNITION

There’s no way we can discuss every scenario that may arise, but let’s try to cover some that are most likely, and the rifles and ammunition combinations that are best suited to them.

When someone has to survive an unscheduled stay in the wild, the three most important things that a rifle can accomplish for him (or her) are signaling, defense, and harvesting small-to-medium game for food. For food, you need to consider the areas you’ll most likely be traveling in, and what kind of game is around. A rifle chambered for the .22LR will probably do 90% of anything you will need to do in the U.S. This caliber has taken--and will continue to take--deer, though for this purpose it is a very poor choice. However, the lowly .22 is a fine choice for small game, requiring lightweight, inexpensive ammo and causing minimal damage to the meat. The sharp crack and high decibel level of the .22 also makes it fairly good for signaling.

While not the best choice for defense, the .22 makes a formidable weapon in the hands of a calm, cool, collected marksman. If you’re traveling and not really expecting trouble, but want to have something available “just in case,” you might consider one of the take-down models such as the Marlin 70SS, or a copy of the old Charter AR-7. They’re light, compact, and relatively inexpensive. Ruger, Marlin, Remington, and others all make fine .22 rifles in semi-auto, bolt, pump, lever, and single-shot actions. Another good choice that offers something for big and small game and defense is the Savage 24-F or 24-V. This combination gun offers the shooter the versatility of having a rifle and a shotgun in the same easy-to-carry package. The rifle barrel is on top and is either currently, or has been, offered in a number of different calibers, including .22LR, .22 Magnum, .22 Hornet, .222, .223 and .30-30. Depending on the model, the shotgun portion can be had in .410, 20, or 12 gauge. The newer 12 gauge version offers interchangeable choke tubes.

Another popular combination is the carbine and handgun that use the same cartridge. This is particularly appealing to those who carry both a sidearm and a rifle and wish to avoid the weight and confusion of carrying two kinds of ammunition. The semi-auto rifle versions that shoot 9mm, .40 S&W, or .45 ACP do not offer much of an advantage over their handgun counterparts in terms of velocity or energy, but do provide a longer sight radius, thus improving accuracy. However, the survivalist who is armed with one of the lever action carbines chambered for the .357, .41, or .44 Magnum, or the .45LC cartridges, paired with one of their handgun counterparts, is indeed very well armed and prepared for most anything he may get himself into. In my opinion, the .357 is the best option given the scenarios we’re considering here (unless you happen to be in big bear country) due to ammo availability, light recoil, and fairly mild muzzle blast--though a .357 Mag handgun still has an earcrushing blast. Since the .357 carbine will shoot most anything that the .357 revolver will, including .38 Special, you should never have any ammo-feed problems.

A good rifleman should rarely feel undergunned with a lever action in a firefight. It’s a very fast-handling weapon, and there are no magazines or stripper clips to lose or damage. The venerable .30-30, for example, is an outstanding rifle, though keep in mind that there is no conventional handgun chambered for that round. Unlike any of the military-style weapons, the levergun can be loaded without taking the gun out of battery. In other words, when there’s a lull in the action, or while you’re moving to another position, it’s simple to stuff more shells into the tubular magazine. If while doing this the enemy catches you by surprise, you simply drop the rounds still in your hand and resume firing. There’s no chance of dropping the magazine you were loading--thus being left with an “$800 single shot.”

For those of the military persuasion, or who are preparing for TEOTWAWKI, a whole new set of rules comes into play. Quite naturally, we’d still like a rifle that is easy to handle, but we also might want to consider a semi-auto built for sustained fire. The military (or military look-alike) weapons are the ones that really fill the bill. When it comes to these, there are a couple of things you need to consider before your purchase. First, of course, is ammo availability. Can you afford enough ammunition to last the duration of the hardships that may befall you? Also, if you’re forced out of your home and away from your supply cache, for whatever reason, you really don’t want to be shooting a “bastard caliber” (i.e., one that is rare and thus difficult to replenish). While you may not like to think about harming others, you need to consider choosing a caliber that is likely to be used by either looters or foreign troops. That way, you can more easily acquire additional ammo should you be fortunate enough to be the victor in a skirmish.

Another thing to think about with regard to military-style rifles is the detachable/fixed magazine dilemma. Sure, the detachable mags are faster to reload, but how many can you carry at once? Are you sure you’ll make it back to base tonight where there are more magazines awaiting you? And did you stash enough magazines to begin with to last you indefinitely in the event that manufacturing is disrupted? Also, what makes you think that, due to the stress and confusion of a real live gunfight, you’ll remember (or have time) to pick up your discarded mags? You are not in the military. There’s no resupply waiting in the rear. No air drops. This is one of the reasons I prefer the SKS over the AR-15. I know, I know. The AR-15 is what we’re all used to . . . and many of the parts will interchange with the M-16 . . . and it’s a NATO round . . . and yada, yada, yada.. But the .223 does not have the energy of the 7.62x39, the AR is not as reliable as the SKS, and although the Ruger Mini 14 is a very reliable weapon, it lacks a little in the accuracy department. The .223 runs out of energy at 300 meters or so, and the 7.62x39 generally runs out of accuracy at about the same distance. Each has virtually the same effective range. However, the 7.62x39 does have substantially more energy at longer ranges.

But back to the magazine debate. I prefer the fixed magazine of the SKS because I can't lose it. And I can also single-load it through the ejection port if I run out of stripper clips. As to size, I prefer the 20-round fixed mag over the ten-round. Now, I don't use the 20-round mag because it holds 20 rounds; I use it because it holds more than ten. That may sound stupid, but let me explain. With the standard ten-rounder, if you fire less than ten rounds, you will have a partially full mag that cannot be refilled except by loading one round at a time. This means you're either going to have a partially loaded gun, or a half-full stripper clip rattling around in your gear losing shells, or you'll have to take time to top off the mag by hand. Circumstance may only allow you to get one stripper load in the 20-round magazine to start with. If you start out with either ten or 20 rounds, you can then shoot anywhere from two to 11 rounds and still be able to easily insert a full stripper clip into it. (It is quite difficult to insert a ten-round stripper in a 20-round mag that already has ten rounds in it; they call it a 20-round magazine, but it works best with 18 or 19.) Since you will not be able to lock your bolt back to insert a stripper clip in an SKS with a partially loaded magazine, here is the procedure that works for me: place the butt of the rifle in the groin area, just below the opening of your right hand trouser pocket. Then reach across the top of the rifle with your left hand and pull the bolt handle fully to the rear. This will eject a live round out that you can either let fall or catch with your right hand (if you have time). Now let the bolt slide slightly forward to accept the clip and insert a loaded stripper clip with your right hand. Now grasp the rifle's forearm with your right hand and release the bolt handle with your left hand and you’re ready for action.

Ideally, we would all like to have either an M1A or FN-FAL (my personal favorite is the AK-47)and a couple hundred 20-round magazines, but for those who just recently started preparing, or who can’t afford the expense, that’s only a dream. Any good rifle chambered for the .30-06, .308 (7.62x51 NATO), the .223 (5.56 NATO), or the 7.62x39 will suffice. But do take the aforementioned suggestions into consideration before buying. Yet another consideration is the ability of your rifle to resist corrosion and weathering. It’s advisable to try to find a rifle with a protective finish, or that is made of stainless steel, and has either a laminated wood or synthetic stock.

There are a number of different sighting options for the survival rifle, all of which have their own calling in life. The open, iron sights that come on most commercial hunting rifles are suitable for most purposes, but are fragile and useless in low-light situations. A good quality scope, on the other hand, is no more fragile than open sights and offers far superior accuracy and low-light capabilities. A good compromise between the two is the aperture, or peep, sight. This sight is used on almost all military-style rifles and is rugged, easy to use, and highly accurate. Aperture sights are also significantly better than open sights in low light. The aperture sight is operated by centering the uppermost part of the front sight in a small aperture in the rear sight, while also holding the front sight on your target. Your eye naturally places the front sight in the center of the aperture with little or no conscious effort on your part. The rear aperture appears as a cloudy ring and is not distracting at all. Just focus on your front sight (which you should also do with open sights, of course, but it’s easier with peep sights), place it on your target, and shoot. These are also sometimes called “ghost ring” sights.

HANDGUNS

Handguns provide yet another platform for some very heated discussions as to what’s best for what purposes: revolver versus semi-auto; single-action or double-action; stainless steel or blued; short barrel versus long barrel; 9mm, .40, .45, .38, or .357. There are also arguments over whether it should be carried “strong side” (i.e., on the side corresponding to your predominant hand) versus “crossdraw,” and the shoulder holster versus the tactical (hip or thigh) holster. And there’s always the night sights issue. It seems the things people find to argue about are practically endless. Let’s try to address a few of them.

Whether you should carry a wheelgun (revolver) or a self-feeder (semi-auto) is a matter of personal preference. Both have their good and bad points. The revolver is somewhat slower to reload and, in most cases, has fewer shots to offer. But there are no magazines to lose and they are mechanically fairly simple. Another thing to consider is that revolvers are offered in much more powerful calibers than are most self-feeders, if that is of concern to you.

In order to reload the double-action revolver with any degree of rapidity, one must use speedloaders. These are nifty little cartridge-holding devices that can release a full load of cartridges into the cylinder of your double-action with the twist of a knob or the push of a button. They are not quite as fast as changing magazines in a semi-auto, but run a very close second with practice. The best speedloaders on the market, in my opinion, are those manufactured by HKS. They are incredibly rugged and reliable. In contrast, reloading the single-action revolver requires removing and replacing cartridges one at a time. An alternative to this would be to have another cylinder or two fitted at the factory for your gun. This will allow you to change cylinders for a more rapid reload, but is not really cost effective. When buying revolvers, stick with top name brands such as Ruger, Smith & Wesson, Colt, and Taurus. My personal favorite is Ruger. Their revolvers are extremely rugged, moderately priced, and more than adequately accurate.

Modern manufacturing techniques, advanced metallurgy, and the advent of space-age polymers have made the semi-auto pistol every bit as reliable as the revolver, and in many cases just as accurate. Modern semi’s are available in a number of different finishes, such as stainless steel, electroless nickel, Parkerized, and, of course, blued. Stay away from nickel or chrome plated guns. They are pretty durable, but once the plating chips, the chip increases in size until the gun must eventually be refinished. The last decade or two has also brought us pistols built on a polymer frame. The most notable of these is the Glock. The Glock was the one of the first of the “plastic” guns, and is virtually indestructible. The polymer that Glock uses is 17% stronger than steel and 83% lighter. In the standard Glock, there are a total of 36 parts, including the magazine, base plate and follower, 3 pins, and no screws. The Tennifer finish on the metal parts is more durable than stainless steel and nearly as hard as diamonds. Needless to say, Glock is also one of my personal favorites.

The debate over which handgun caliber is best is as old as the calibers themselves. The bottom line is shot placement. If you don’t hit your target in the right place, it doesn’t matter what you use. Two of the most popular calibers are 9mm and .45. The 9mm has more penetration than the .45, but the .45 has more energy. My personal favorite is the .40 S&W, as I think it has the attributes of both. But none of these has quite the power of the .357 magnum, let alone the .41 mag or .44 mag.

For carry, I prefer a crossdraw holster for my hunting revolvers, and a beltslide for my daily carry gun, which is a Glock. The crossdraw allows easy access to the gun when driving or riding a horse. The lighter, shorter semi-auto in the beltslide is not even noticeable and I can wear it in any situation.

Tritium night sights are definitely a plus in low-light operations. They offer a very clear, precise sight picture even in total darkness. Tritium is a radioactive substance that generates light--but don’t worry, you would have to ingest something like 30,000 sets of them in order receive as much radiation as one dental X-ray. Most of these sights offer a 12-year half-life, which means that they will be half as bright in 12 years as they were when they were manufactured.

The handgun’s role in the survival arsenal depends a lot on how proficient you are with it. Although a handgun shouldn’t be considered your primary weapon, you should be competent enough with yours that if it was all you had, you’d still be able to feed and/or defend yourself. Generally speaking, the average effective range of most handguns is about 50 yards. That being said, depending on caliber and type of gun, you can easily stretch that distance out past 100 yards with practice. A good, accurate .22LR handgun, such as the Ruger MK II or Single-Six, is indispensable for small game hunting. Most handgun calibers are also suitable for deer-sized game if you are close enough and place your shot well. I am not, however, advocating that an inexperienced handgunner go after deer, except in an emergency. Also, you would be well advised to buy a handgun with some kind of protective finish, or (with respect to self-loaders) a polymer frame.

Whatever sidearm you choose, use the right ammunition for the job. For defense from most animals (including two-legged varmints), and also for hunting medium-sized game, a good hollowpoint is the most effective--although there is considerable evidence that some of the flat-nosed, hard cast bullets are also very effective in the hunting field. For larger dangerous game, and for smaller edible game, a solid bullet such as some FMJ’s, and most hard cast bullets, are the better choice. They’re better for dangerous game because they offer more penetration, and for small game because they don’t destroy as much meat as a hollowpoint.

A FEW WORDS ABOUT SHOTGUNS

For personal protection, the shotgun has no peer. It is a graphically devastating weapon. For most of the purposes considered in this article, a pump-action 12 gauge is hard to beat. Although the 20 gauge is a very comfortable and effective gun to shoot, it’s best reserved for hunting. This is because you’ll have a hard time finding either buckshot or slugs for the 20. Wal-Mart, for example, rarely even carries the heavier 20 gauge stuff, simply because there’s not enough demand for it. And it’s hard to get them to special order things sometimes. A lot of men buy a 20 gauge for their kids or wives, but they mostly use them to hunt birds or rabbits, so most stores don’t see a need to carry anything but the smaller shot. There just aren’t very many people who hunt deer with a 20 gauge, or use it for defense.

Not that there’s anything wrong with the 20 gauge; we have two of them. But for a survival situation, the 12 gauge is a much better choice, simply because of ammo availability. Police, military, other survivalists, militia members, ranchers, etc., all use the 12. If you do insist on using the 20 gauge, and plan on storing a bunch of shells to make up for non-availability, what happens if you have to “bug-out”? You can only carry so much, and leaving the gun behind shouldn't be an option, as I think a shotgun is mandatory. When you use up what you can carry, you’ll just be out. You can’t carry all that reloading stuff with you, either. I personally am not really stocking up on any reloading supplies. Of course, I have a bunch anyway, just because it’s a serious hobby of mine, but I figure when things go bad, I would rather have all those components already assembled into something that I can use.

Something else to consider is power. While the velocities of the 20 gauge are comparable to the 12 gauge, the weight of any given shot charge or slug is much more with the 12. Granted, this generates a little more recoil, but my 5’5”, 140-lb. wife can handle a 12 just fine. (She also prefers a .44 mag to hunt with. It’s all in the training.) The 20 gauge usually shoots a slug that either weighs 273 grains or 328 grains. And I have one “recipe” for a 341-gr. slug. Compare that to a 12 gauge that shoots slugs weighing anywhere from 437 grs. to 575 grs. That’s a hell of an increase in delivered energy, which translates to penetration and longer range. Twelve gauge slugs are also good medicine for “hard” targets; i.e., cars, block or brick walls, and so on. Not as good as a .308 or 30.06 in some cases, but still very good.

As far as buckshot goes, #3 buck is the by far the most common for the 20 gauge. If you get much bigger than that, the 20’s little shell just doesn’t hold enough pellets to do any good. If the 12 gauge only holds between nine and 12 double-ought buckshot pellets (depending on manufacturer and type of wad used), you can safely assume that the 20 would hold only five to six of the same pellets. While you can put eight pellets of #1 buck in a 20 gauge shell, most 12 gauge loads will hold 16. In any case, you’re not looking at a very dense pattern from the 20 for defensive purposes.

A couple of the best choices for defensive shotguns are the Mossberg 590 or 500, and the Remington 870. While some will tell you that the 590 is far and away better than the 870, it really comes down to what you like. I’ll admit that the 590 has a slight edge over the 870, simply because it was designed solely as a combat shotgun. It really has no sporting purpose. There are plenty of after-market accessories available for both the Mossberg and the Remington. Also, Winchester makes a couple of suitable defensive-type shotguns, but I have no personal experience with them.

LONG-TERM GUN STORAGE

A question I get asked frequently is, “How do you suggest I store firearms and ammunition in such a way that I would not lose them in the event my house burned down or was broken into or Uncle Sugar wanted to come get them for one reason or another?”

One way is to buy one of the waterproof containers available almost everywhere (and cost too much), slide your gun into a rust-proof storage bag, put it in the container, then bury it somewhere. The method I recommend, however, works just as well and will protect your guns indefinitely.

Buy as much 8-inch PVC pipe as you need from a water/sewer materials distributor. Eight inches in diameter is larger than you will find at any hardware store. Get the kind of pipe designed for handling sewer water rather than fresh water (ask for SDR35). The water pipe works fine, but is unnecessarily heavy and expensive. There are three kinds of caps you can get to seal the ends. One kind is glued on and is permanent, but if you’ve never installed pipe before, it’s easy to miss a spot with your glue and thus allow for leakage. Another kind of cap is rubber gasketed. To use these, bevel the pipe back about 3/4 of an inch with a rasp or grinder, smear an even coat of lubricant on the pipe end (any kind of liquid soap will work), then slip the cap on. If done correctly, the seal will be absolutely 100% air and water tight. The third kind of cap uses a glue-on adaptor with a screw-type plug. You just glue the adaptor to the pipe end and the plug screws in to it. But these are unnecessarily expensive and just about impossible to remove without a BIG wrench. In my opinion, the gasketed caps are the best choice because to remove them, you can hold the pipe between your legs and kick them off or use a rock. No tools are required. To put them back on the pipe, just use a little liquid soap as you did the first time. You should have room for two long guns, a couple of handguns, and a little ammo for each in a 4-foot section of 8-inch pipe. Since scoped rifles, rifles with fixed mags, and even some open-sighted rifles with a lot of drop in the stock may not fit into a 6-inch pipe, spend just a little more and buy the bigger 8-inch stuff.

Now that you have your pipe prepared, clean your guns as you normally would, leaving a very light film of oil on them. Forget cosmoline or heavy grease; Break-Free is my preference. Slip each gun into a breathable case, then put it into your pipe. To make an effective dessicant, put some crushed sheetrock or kitty litter on a cookie sheet and bake it at 300 degrees for about 30 minutes. Fill a sock half full with your homemade dessicant, tie it off, and put it in the pipe. (If you don’t like the homemade method, you can always go spend a bunch of money on special dessicants that some people say you just can’t live without.) Before sealing, keep the pipe in the house for a day or two to make absolutely sure that the interior is as dry as it can be. This is especially important if you live in a humid climate.

Bury the sealed pipe somewhere away from your house, preferably half a mile or more depending on the population close at hand. If possible, bury it vertically in order to present a smaller target for metal detectors and ground penetrating radar. If you must bury it close to your home, try to place it parallel to metal pipelines, under the edge of a metal-reinforced concrete slab, under a fence post, etc.

SOUND ADVICE

In closing, I would like to offer my suggestions for a practical arsenal. For the individual that is solely concerned with wilderness survival and personal defense, I would suggest, at the very least, a .22 handgun and rifle, a centerfire handgun, and a shotgun. The .22s provide you with the means to practice a lot for the price of peanuts. As I noted at the beginning of this article, a .22 will do 90% percent of whatever needs done. The centerfire handgun or the shotgun will provide you with all the defensive capabilities that you’ll need for any dangerous game or bad guys you’re likely to run across in the woods.

For folks who are concerned with the state of the nation and the rough waters that lie ahead, I would suggest all the above, along with a centerfire rifle in one of the configurations we discussed earlier. Remember, you can’t have too much ammo. I would recommend you have a minimum of 1,000 rounds for each centerfire rifle, and 500 to 1,000 rounds for the shotgun, with about half of that being birdshot (such as #6 or #4) and the rest in heavy buckshot and slugs. The birdshot is just as deadly at close range as the bigger stuff and is also suitable for small game hunting. I’d also suggest 500 rounds for each centerfire handgun, and as many .22 shells as you have room to store. I truly believe that .22 ammunition may be the standard by which barter with, at least for a time. I think the time will come when a box of .22 shells will buy you a chicken or two or a set of flashlight batteries.

See that every person in your home who is old enough to shoot is properly trained in the use of all these guns, and that eye and ear protection is available.

There are many other things concerning the troubled times that await us that I’d like to share with you, but that’s another story.

Copyright 1999 by Cope Reynolds

This article may be freely copied and distributed for non-commercial purposes, as long as it remains unedited as to content (which includes the title, the author’s name, and copyright information), and this notice is attached.
__________________

Monday, February 11, 2013

Ed's Red DIY Gun Cleaning Solvent


Ed's Red Bore Cleaner... Home-Mix Really Works

By C.E. Ed Harris

Updated & Revised 9-29-95.

Four years ago I mixed my first "Ed's Red" or "ER" bore cleaner and hundreds of users have told me that they think this home-mixed cleaner is more effective than commercial products. I urge you to mix some and give it a fair trial, compared to whatever you have been using. Competitive shooters, gun clubs and police departments who use a gallon or more of rifle bore cleaner annually can save by mixing their own, and they will give up nothing in safety or effectiveness.

This cleaner has an action very similar to standard military issue rifle bore cleaner, such as Mil-C-372B. Users report it is more effective than Hoppe's for removing plastic fouling in shotgun bores, or caked carbon fouling in semi-automatic rifles or pistols, or in removing leading in revolvers. It is not as effective as Sweets 7.62, Hoppe's Bench Rest Nine or Shooter's Choice for fast removal of heavy copper fouling in rifle bores. However, because "ER" is more effective in removing caked carbon and abrasive primer residues than other cleaners, metal fouling is greatly reduced when "ER" is used on a continuing basis.

I originally came up with this mix because I am an active high power rifle competitive shooter and hand loading experimenter who uses a lot of rifle bore cleaner. I was not satisfied with the performance and high price of commercial products. I knew there was no technical reason why an effective firearm bore cleaner couldn't be mixed using common hardware store ingredients. The result is inexpensive, effective, provides good corrosion protection and adequate residual lubrication so that routine "oiling" after cleaning is rarely necessary, except for long-term storage of over 1 year, or harsh service environments, such as salt water exposure.

This formula is based on proven principles and incorporates two polar and two nonpolar solvents. It is adapted from the one in Hatcher's Notebook for "Frankford Arsenal Cleaner No.18," but substituting equivalent modern materials. I had the help of an organic chemist in doing this and we knew there would be no "surprises." The original Hatcher formula called for equal parts of acetone, turpentine, Pratts Astral Oil and sperm oil, and optionally 200 grams of anhydrous lanolin added per liter. Some discussion of the ingredients is helpful to understand the properties of the cleaner and how it works.

Pratts Astral oil was nothing more than acid free, deodorized kerosene. I recommend "K1" kerosene of the type normally sold for use in indoor space heaters. Some users have reported successful substitution of civilian aviation grade kerosene such as Turbo-A. I am reluctant to "recommend" substitution of aviation grade kerosene, because the effects upon firearm components of the additives required in aviation fuels are unknown. Some "jet- fuels" are gasoline/kerosene blends and absolutely should not be used, because of their increased flammability.

An inexpensive, effective substitute for sperm oil is Dexron (II, IIe or III) automatic transmission fluid. Prior to about 1950 that most ATF's were sperm oil based, but during WWII a synthetic was developed for use in precision instruments. With the great demand for automatic transmission autos after WWII, sperm oil was no longer practical to produce ATF in the quantity demanded, so the synthetic material became the basis for the Dexron fluids we know today. The additives in ATFs which include organometallic antioxidants and surfactants, make it highly suitable for inclusion in an all-purpose cleaner-lubricant-preservative.

Hatcher's original Frankford Arsenal No. 18 formula used gum spirits of turpentine. Because turpentine is expensive today, and is also an "aromatic" solvent, which is highly flammable, I chose not to use it. Safer and cheaper is "aliphatic mineral spirits," a petroleum based "safety solvent" used for thinning oil based paints and also widely used as an automotive parts cleaner. It is commonly sold under the names "odorless mineral spirits," "Stoddard Solvent" or "Varsol".

Acetone is included in "ER" to provide an aggressive, fast-acting solvent for caked powder residues. Because acetone is an aromatic, organic solvent, it is recommended that users leave it out if the cleaner will be used in enclosed spaces lacking forced air ventilation. The acetone in ER will evaporate, liberating volatile organic compounds (VOCs) into the atmosphere unless containers are kept tightly closed when not in use. The cleaner is still effective without the acetone, but it is not as "fast-acting."

There isn't anything in Ed's Red which chemically dissolves copper fouling in rifle bores, but it does a better job removing on carbon and primer residue than anything else which is safe and commonly available. Numerous users have told me, that exclusive use of "ER" reduces copper deposits, because it removes the old impacted powder fouling which is left by other cleaners, which reduces the abrasion and adhesion of jacket metal to the bore surface, leaving a cleaner surface condition which reduces subsequent fouling. Experience seems to indicate that "ER" will actually remove metal fouling it if you let it "soak," so the surfactants will do the job, though you have to be patient.

Addition of the lanolin to ER bore cleaner mix is entirely optional. The cleaner works quite well and gives adequate corrosion protection and lubrication for most users without it. Incorporating the lanolin makes the cleaner easier on the hands, and increases lubricity and film strength, and improves corrosion protection if weapons will be routinely exposed to salt air, water spray, industrial or urban corrosive atmospheres, or if you intend to use the cleaner as a protectant for long term storage of over 1 year.

If you use other protective films for adverse use or long term storage you can leave the lanolin out and save about $8 per gallon. At current retail prices you can buy all the ingredients to mix ER, without the lanolin for about $10 per gallon. I urge you to mix some yourself. I am confident it will work as well for you as it does for me and hundreds of users who got the "recipe" on the Fidonet Firearms Echo.


[edit] CONTENTS: Ed's Red Bore Cleaner

* 1 part Dexron II, IIe or III ATF, GM Spec. D-20265 or later.
* 1 part Kerosene - deodorized, K1
* 1 part Aliphatic Mineral spirits, Fed. Spec. TT-T-2981F, CAS

1. 64741-49-9, or may substitute "Stoddard Solvent", CAS #8052-41-3, or

equivalent, (aka "Varsol")

* 1 part Acetone, CAS #67-64-1.
* (Optional up to 1 lb. of Lanolin, Anhydrous, USP per gallon, OK to

substitute Lanolin, Modified, Topical Lubricant, from the drug store)
[edit] Mixing Instructions for "ER" Bore Cleaner:

Mix outdoors, in good ventilation. Use a clean 1 gallon metal, chemical-resistant, heavy gage PET or PVC plastic container. NFPA approved plastic gasoline storage containers are also OK. Do NOT use HDPE, which is permeable, because the acetone will eventually evaporate. The acetone in ER will also attack HDPE, causing the container to collapse, making a heck of a mess!

Add the ATF first. Use the empty container to measure the other components, so that it is thoroughly rinsed. If you incorporate the lanolin into the mixture, melt this carefully in a double boiler, taking precautions against fire. Pour the melted lanolin it into a larger container, rinsing the lanolin container with the bore cleaner mix, and stirring until it is all dissolved.

I recommend diverting a small quantity, up to 4 ozs. per quart of the 50-50 ATF/kerosene mix for optional use as an "ER-compatible" gun oil. This can be done without impairing the effectiveness of the remaining mix.
Label and Necessary Safety Warnings:

RIFLE BORE CLEANER CAUTION: FLAMMABLE MIXTURE
HARMFUL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN

1. Flammable mixture. Keep away from heat, sparks or flame.
2. FIRST AID, If swallowed DO NOT induce vomiting, call physician

immediately. In case of eye contact immediately flush thoroughly with water and call a physician. For skin contact wash thoroughly.

1. Use with adequate ventilation. Avoid breathing vapors or spray mist.

It is a violation of Federal law to use this product in a manner inconsistent with its labelling. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. If using in closed armory vaults lacking forced air ventilation wear respiratory protection meeting NIOSH TC23C or equivalent. Keep container tightly closed when not in use.


Instructions for using "Ed's Red (ER)" Bore Cleaner:

1. Open the firearm action and ensure the bore is clear. Cleaning is most effective when done while the barrel is still warm to the touch from firing. Saturate a cotton patch with bore cleaner, wrap or impale on jag and push it through the bore from breech to muzzle. The patch should be a snug fit. Let the first patch fall off and do not pull it back into the bore.
2. Wet a second patch, and similarly start it into the bore from the breech, this time scrubbing from the throat area forward in 4-5" strokes and gradually advancing until the patch emerges out the muzzle. Waiting approximately 1 minute to let the bore cleaner soak will improve its action.
3. For pitted, heavily carbon-fouled "rattle battle" guns, leaded revolvers or neglected bores a bronze brush wet with bore cleaner may be used to remove stubborn deposits. This is unnecessary for smooth, target-grade barrels in routine use.
4. Use a final wet patch pushed straight through the bore to flush out loosened residue dissolved by Ed's Red. Let the patch fall off the jag without pulling it back into the bore. If you are finished firing, leaving the bore wet will protect it from rust for 1 year under average conditions.
5. If the lanolin is incorporated into the mixture, it will protect the firearm from rust for up to two years. For longer term storage I recommend use of Lee Liquid Alox as a Cosmolene substitute. "ER" will readily remove hardened Alox or Cosmolene.
6. Wipe spilled Ed's Red from exterior surfaces before storing the gun. While Ed's Red is harmless to blue and nickel finishes, the acetone it contains is harmful to most wood finishes).
7. Before firing again, push two dry patches through the bore and dry the chamber, using a patch wrapped around a suitably sized brush or jag. First shot point of impact usually will not be disturbed by Ed's Red if the bore is cleaned as described.
8. I have determined to my satisfaction that when Ed's Red is used exclusively and thoroughly, that hot water cleaning is unnecessary after use of Pyrodex or military chlorate primers. However, if bores are not wiped between shots and shots and are heavily caked from black powder fouling, hot water cleaning is recommended first to break up heavy fouling deposits. Water cleaning should be followed by a thorough flush with Ed's Red to prevent after-rusting which could result from residual moisture. It is ALWAYS good practice to clean TWICE, TWO DAYS APART whenever using chlorate primed ammunition, just to make sure you get all the corrosive residue out.

This "Recipe" is placed in the public domain, and may be freely distributed provided that it is done so in its entirely with all current revisions, instructions and safety warnings included herein, and that proper attribution is given to the author.

In Home Mix We Trust, Regards, Ed


Military C-L-P (Clean - Lube - Preservative)

MIL-L-63460
From Wikipedia, the free encyclopedia
(Redirected from Cleaner, Lubricant, Preservative)
Jump to: navigation, search

The United States Military Specification referred to as MIL-L-63460, "Military Specification, Lubricant, Cleaner and Preservative for Weapons and Weapons Systems" (superseded by "MIL-PRF-63460, Performance Specification Lubricant, Cleaner And Preservative For Weapons And Weapons Systems" on August 5, 1985) covers a type of cleaner, lubricant, and preservative used for weapons and weapons systems.
Contents


* 1 Scope of the Standard
* 2 Identification
* 3 Properties
* 4 Lead Standardization Agency
* 5 References and External links

Scope of the Standard

The military specification MIL-L-63460 describes the performance requirements and verification methods for a type of Lubricant, Cleaner and Preservative for Weapons and Weapons Systems. The product is for use in cleaning, lubricating and short-term preservation of both small and large caliber military weapons, operating in the temperature range of -51 to + 71 °C (-60 to +160 °F).
Identification

This lubricant is identified by its U. S. Military acronym CLP and its NATO code number S-758.
Properties

CLP is a highly penetrating, mobile liquid and is intended for field application to satisfy the complete need of cleaning, lubricating, and short term preservation of military weapons. CLP facilitates the effective removal of firing residues, gums, and other contaminants from weapon components while providing lubrication and short term preservation for reliable weapons operation. CLP may be used in lieu of MIL-PRF-372, MIL-PRF-3150,MIL-PRF-14107, and MIL-L-46000 where authorized by the applicable weapons manual or lubrication order.
Lead Standardization Agency

The military standard MIL-PRF-63460 is issued and maintained by the Defense Supply Center (Richmond, VA) who is chartered under the Defense Standardization Program (DSP) with maintaining the functional expertise and serving as the DoD-wide technical focal point for the standard. The current document revision (2009) is Revision E, Amendment 1 (i.e. MIL-PRF-63430E w/ Amendment 1) which was issued in May 15, 2008. It superseded Revision D (i.e. MIL-PRF-63430D) released on August 5, 1985 that in turn superseded Revision C (i.e., MIL-L-63460C) which was last updated on November 16, 1980. NOTE: A limited coordination military specification was prepared prior to a coordinated revision of MIL-L-63460, and it was referred to as MIL-L-006346C; this document was dated June 24, 1983.
References and External links

* "MIL-PRF-63460D (W/ INTERIM AMENDMENT 7), PERFORMANCE SPECIFICATION LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS" (PDF). United States Department of Defense. 26 MAR 2005. http://www.everyspec.com/MIL-PRF/MIL-PRF+(030000+-+79999)/MIL-PRF-63460D_INTERIM_AMENDMENT-7_13241/.
* "MIL-PRF-63460E, PERFORMANCE SPECIFICATION LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS" (PDF). United States Department of Defense. 15 MAR 2006. http://www.everyspec.com/MIL-PRF/MIL-PRF+(030000+-+79999)/MIL-PRF-63460E_13239/.
* "MIL-L-0063460C (AMENDMENT 1), MILITARY STANDARD: LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS" (PDF). United States Department of Defense. 24 may 1984. http://www.everyspec.com/MIL-SPECS/MIL+SPECS+(MIL-L)/MIL-L-63460C_AMENDMENT-3_14679/.
* "MIL-L-0063460C, MILITARY STANDARD: LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS" (PDF). United States Department of Defense. 24 JUN 1983. http://www.everyspec.com/MIL-SPECS/MIL+SPECS+(MIL-L)/MIL-L-0063460C_14680/.

3oz CLP in reusable steel military surplus oil bottle, as pictured.
$4.99 + shipping






The Load

      

"The Load" is 13 Grains of Red Dot" (In most strong-actioned, military rifles of .30 cal. or larger)


    


By C.E. (Ed) Harris, Revised 2-16-94
Red Dot is bulky, compared to the usual rifle powders used in .30-06 size cases. It occupies more powder space in typical charges than common "reduced load" rifle powders, such as #2400, IMR4227, IMR4198 or RL-7. The lower bulk density of Red Dot adequately addresses my safety concerns because it makes an accidental double charge far less likely.

"The Load" has distinct advantages over more expensive alternatives, within certain limitations, which are:

1. The case must be LARGER than the .300 Savage or .35 Remington.

2. The rifle must be of MODERN (post 1898) design, suitable for smokeless powder, with a bore size of .30 cal. or larger.

3. The bullet weight must be within the NORMAL range for the given cartridge.

4. Inert fillers such as Dacron, kapok or are NOT RECOMMENDED! (Nor are they necessary).

Gas-checked cast bullets required in the .30 cals., otherwise you will get leading, but plain-based ones work fine in the 8mm Mauser or larger.

"The Load" has shown complete success in the .30-40 Krag, .303 British, 7.65 Argentine, .308 Win., 7.62x54R Russian, .30-06, 8x57 and .45-70.

"The Load" fills 50% or more of a .308 Win or .30-'06 case. The risk of an accidental double charge is greatly reduced, because the blunder is immediately obvious if you visually check, powder fill on EVERY CASE, as you should whenever hand-loading! A bulky powder measures more uniformly, because normal variation in the measured volume represents a smaller percentage of the charge weight.

Red Dot's granulation is somewhat less coarse than other flake powders of similar burning rate, such as 700-X, which aids metering. Its porous, uncoated flakes are easily ignited with standard primers. So-called "magnum" primers do no harm in cases larger than the .30-'06, but are neither necessary nor recommended in smaller ones. I DO NOT recommend pistol primers in reduced rifle loads, because weak primers may cause erratic ignition, and their thinner cups can perforate more easily, causing gas leakage and risk of personal injury!

The velocities obtained with 13 grs. of Red Dot appear mild, but "The Load" is no pipsqueak! In a case like the .308 or .30-06, you get (from a 24" sporter barrel) about 1450 fps with a 200gr. cast bullet, 1500 with a 170gr, or 1600 with a 150gr cast load. "The Load" is fully comparable to "yesterday's deer rifle", the .32-40, and provides good expansion of cheap, soft alloys (10-13 BHN) at woods ranges. Jacketed bullet velocities with "The Load" are about 120-150fps less than a lubricated lead bullet of the same weight.

My preferred alloy in the .30 cals. is a mixture of 3-5 lbs. Of .22 backstop scrap to 1 lb. of salvaged linotype. Wheel-weights also work well, as do soft "Scheutzen" alloys such as 1:25 tin/lead. in bores of 8 mm or larger. "The Load" drives soft-cast .30-cal. to 8 mm bullets fast enough to get expansion, but without fragmenting. These out-penetrate factory .30-30 softpoints, and kill medium game up to 150 lbs. well at short ranges up to 100 yards, when placed accurately.

The Load" works well with jacketed bullets, giving somewhat lower velocities than with cast lead, due to less effective obturation and greater friction in the bore. The 85gr or 100gr Hornady or 90gr. Sierra JHP for the .32 H&R Mag. revolver, or the Remington 100gr .32-20 softpoint bullet become mild, but destructive varmint loads at 1600 fps from a .308 or '06.

If you substitute a stiffly jacketed 110gr .30 Carbine softpoint bullet, designed for higher velocities than imparted by "The Load", you have a non-destructive "coup de gras", small game or wild turkey load which shoots close to your deer rifle's normal zero, but at 25 yards! The 173-gr. Match .30 cal. boattail bullets may not shoot as well at these low velocities as lighter flat bases in the 12" twist .308 Win. barrels, but they do quite well in ten-inch twist barrels such as in the '06, 7.62 Russian and .303 British.

The economy of a lighter charge is obvious. A full power .30-06 load using 50 grs. of an IMR powder like 4064 costs 10 cents a pop, just for powder, at 140 rounds per pound (if you are lucky enough to find new powder for $14/lb.). Substituting 13 grs. Of Red Dot gets 538 rounds per pound at a cost of 2.6 cents which is a savings of over $7 per hundred rounds in powder alone! Greater
savings are possible if you get the best price and buy powder by the caddy.

Velocity and point of impact of "The Load" is not noticeably affected by varying powder position in the case. Red Dot is very clean burning and is economical both on the basis of its lower charge weight, and its lower basic cost per pound compared to other "rifle" powders.

Best of all, using a shotshell powder I already have reduces the kinds of powder I keep and eliminates the need for a special "reduced load" powder. This approach is ideal for rifle shooters who are also shotgunners, since almost everybody who reloads for 12-ga. probably has a keg of Red Dot already!

You can safely increase these charges up to 2 grains as needed to get best accuracy, but they will lead above 1300 fps unless gas-checked. Some individual rifles with smooth barrels shoot quite well up to 7 or 7.5 gr of these powders, but best accuracy is usually obtained when velocities are kept subsonic. I generally look for a velocity of 1080 +/- 30 fps These loads will usually shoot 2-1/2" to 3" groups at 100 yards. The minimum safe load which will always exit the barrel for indoor gallery work is about 4 grs. of the above powders.

More caution is required when assembling subsonic loads with jacketed bullets, because there is some risk of the bullet becoming lodged in the bore at near-subsonic velocities. You should not attempt to use less than 6 grs. of the above pistol or shotgun powders when loading jacketed bullets unless you check the bore after every shot and keep your hammer and ramrod handy!